TRIPP LITE OMNIVSINT800
- Send to a friend
- Print
- View full size
Shipping Calculator - Select country to view prices of item/s added in your cart
*
800VA - 475W Line Interactive Tower UPS
Categories
Information
Useful links
Specials
Use mouse wheel to scroll
New products
No new product at this time
| OUTPUT | |
|---|---|
| Output Volt Amp Capacity (VA) | 800 |
| Output Watt Capacity (watts) | 475 |
| Nominal Output Voltage(s) Supported | 230v |
| Frequency compatibility | 50 / 60 Hz |
| Output voltage regulation (Battery mode) | +/- 5% |
| Built-in UPS output receptacles | 4 C13 outlet(s) |
| Included output power cables | Includes 2 C13 to C14 output power cables |
| Output AC waveform (AC mode) | Sine wave |
| Output AC waveform (battery mode) | PWM sine wave |
| INPUT | |
| Rated input current (at maximum load) | 2.4A |
| Nominal Input Voltage(s) Supported | 230V AC |
| UPS input connection type | C14 inlet |
| UPS input connection description | Attached 15cm line cord with C14 inlet. The C14 accepts a user-supplied AC power cord with country-specific plug. |
| UPS Input cord length (ft.) | 0.5 |
| UPS Input cord length (m) | 0.2 |
| BATTERY | |
| Full load runtime (minutes) | 3.5 min. (475w) |
| Half load runtime (minutes) | 11.5 min. (240w) |
| DC system voltage | 12V DC |
| Battery recharge rate (included batteries) | Less than 4.5 hours from 10% to 90% |
| Replacement battery cartridge (internal UPS battery replacement) | RBC51 |
| Battery Access | Battery access door |
| Battery replacement description | Hot-swappable, user replaceable batteries |
| VOLTAGE REGULATION | |
| Voltage regulation description | Automatic voltage regulation (AVR) maintains line power operation with input voltage as low as 159 |
| Undervoltage correction | Input voltages between 159 and 199 are boosted by 14% |
| LEDS ALARMS & SWITCHES | |
| LED Indicators | 4 LEDs indicate line power, battery power, overload and battery low/replace status |
| Alarms | Audible alarm indicates power-failure and low-battery conditions |
| Alarm cancel operation | Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status |
| Switches | 2 Switches control off/on power status and alarm-cancel/self-test operation |
| SURGE / NOISE SUPPRESSION | |
| UPS AC suppression joule rating | 340 |
| UPS AC suppression response time | Instantaneous |
| UPS Dataline suppression | 1 line TEL / DSL protection (1 in / 1 out) |
| EMI / RFI AC noise suppression | Yes |
