TRIPP LITE SMARTINT3000VS
- Send to a friend
- Print
- View full size
Shipping Calculator - Select country to view prices of item/s added in your cart
*
3000VA - 2250W Line Interactive extended-run tower UPS
Categories
Information
Useful links
Specials
Use mouse wheel to scroll
New products
No new product at this time
| OUTPUT | |
|---|---|
| Output Volt Amp Capacity (VA) | 3000 |
| Output kVA capacity (kVA) | 3 |
| Output Watt Capacity (watts) | 2250 |
| Output kW capacity | 2.2 |
| Output power factor | 0.8 |
| Output Capacity Details | Output de-rates to 1600 watts with external battery packs connected |
| Nominal Output Voltage(s) Supported | 230v |
| Frequency compatibility | 50 / 60 Hz |
| Output voltage regulation (line mode) | -19% +8% |
| Output voltage regulation (Battery mode) | +/- 5% |
| Built-in UPS output receptacles | 8 C13 outlet(s); 1 C19 outlet(s) |
| Included output power cables | Includes 3 C13 to C14 output power cables |
| Built-in controllable switched load banks | Three switchable two-outlet C13 load banks |
| Output circuit breaker | 10A (x2) - each breaker protects 4 C13 outlets each, C19 is unbreakered |
| Basic PDU options | PDUNV (1U / 2 C19, 12 C13 outlets) |
| Metered PDU options | PDUMV20HV (0U / 6 C19, 32 C13 outlets) |
| Switched PDU options | PDUMH20HVNET (1U / 8 C13 outlets); PDUMV20HVNET (0U / 4 C19, 24 C13 outlets) |
| PDU recommendation notes | All noted SWITCHED and METERED PDUs require C19 to C20 input cable (P036-006 or similar) |
| Output AC waveform (AC mode) | Sine wave |
| Output AC waveform (battery mode) | PWM sine wave |
| INPUT | |
| Rated input current (at maximum load) | 15.4A |
| Nominal Input Voltage(s) Supported | 230V AC |
| UPS input connection type | C20 inlet |
| UPS input connection description | IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles |
| BATTERY | |
| Full load runtime (minutes) | 4 min. (2250w) |
| Half load runtime (minutes) | 14 min. (1125w) |
| Expandable battery runtime | Extended runtime supported via optional external battery packs |
| External battery pack compatibility | BP48V24-2U (limit 1); BP48V60RT3U (multi-pack compatible) |
| DC system voltage | 48V DC |
| Battery recharge rate (included batteries) | Less than 4 hours from 10% to 90% |
| Replacement battery cartridge (internal UPS battery replacement) | RBC54 |
| Battery Access | Battery access door |
| Battery replacement description | Hot-swappable, user replaceable batteries |
| VOLTAGE REGULATION | |
| Voltage regulation description | Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151V to 282V |
| Overvoltage correction | Input voltages between 245 and 282 are reduced by 12% |
| Undervoltage correction | Input voltages between 177 and 199 are boosted by 14% |
| Severe undervoltage correction | Input voltages between 151 and 176 are boosted by 30% |
| LEDS ALARMS & SWITCHES | |
| LED Indicators | 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status |
| Alarms | Audible alarm indicates power-failure, overload and low-battery conditions |
| Alarm cancel operation | Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status |
| Switches | 2 Switches control off/on power status and alarm-cancel/self-test operation |
| SURGE / NOISE SUPPRESSION | |
| UPS AC suppression joule rating | 480 |
| UPS AC suppression response time | Instantaneous |
| EMI / RFI AC noise suppression | Yes |
