Categories

Manufacturers

Service

Specials

Use mouse wheel to scroll

All specials

New products

No new product at this time

TRIPP LITE SUINT1000RTXL2U

TRIPP LITE SUINT1000RTXL2U

1000VA - 800W Online Rack/Tower 2U UPS

More details


€ 571.20 VAT incl.
(€ 480.00 + VAT)


tri-0080


Add to my wishlist


OUTPUT
Output Volt Amp Capacity (VA) 1000
Output kVA capacity (kVA) 1
Output Watt Capacity (watts) 800
Output power factor 0.8
Crest Factor 3:1
Nominal Output Voltage(s) Supported 200v; 220v; 230v; 240v
Nominal Voltage details 230V default
Frequency compatibility 50 / 60 Hz
Frequency compatibility details Output frequency matches input nominal on startup, defaults to 50 Hz on cold-start
Output voltage regulation (line mode) +/- 2%
Output voltage regulation (Economy line mode) +/- 10%
Output voltage regulation (Battery mode) +/- 2%
Built-in UPS output receptacles 6 C13 outlet(s)
Included output power cables Includes 2 C13 to C14 output power cables
Basic PDU options PDUNV (1U / 2 C19, 12 C13 outlets)
Switched PDU options PDUMH15HVNET (1U / 8 C13 outlets)
Output AC waveform (AC mode) Sine wave
Output AC waveform (battery mode) Sine wave
INPUT
Rated input current (at maximum load) 5.1A (200V), 4.9A (208V), 4.6A (220V), 4.4A (230V), 4.2A (240V)
Nominal Input Voltage(s) Supported 200V AC; 220V AC; 230V AC; 240V AC
UPS input connection type C14 inlet
UPS input connection description IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles
Input circuit breaker 8A
BATTERY
Full load runtime (minutes) 4 min. (800w)
Half load runtime (minutes) 12 min. (400w)
Expandable battery runtime Extended runtime supported via optional external battery packs
External battery pack compatibility BP24V15RT2U (limit 1); BP24V28-2U (limit 1); BP24V70-3U (multi-pack compatible)
DC system voltage 24V DC
Battery recharge rate (included batteries) Less than 6 hours from 10% to 80%
Replacement battery cartridge (internal UPS battery replacement) RBC92-2U
Battery Access Front panel battery access door
Battery replacement description Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation description Online, double-conversion power conditioning
Overvoltage correction 2% output voltage regulation during overvoltages to 275
Undervoltage correction 2% output voltage regulation during undervoltages to 156
Severe undervoltage correction 2% output voltage regulation during undervoltages to 130 (under 70% load only)
LEDS ALARMS & SWITCHES
LED Indicators 14 LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery low, replace battery and fault status information; 4-LED meter displays load and battery charge levels; LED panel rotates for viewing in rack/tower formats
Alarms Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating 1225
UPS AC suppression response time Instantaneous
UPS Dataline suppression 1 line TEL / DSL or 10Base T Ethernet protection
EMI / RFI AC noise suppression Yes

technorati delicious reddit facebook twitter stumbleupon yahoo digg flickr

My Account

E-mail address

Password



Create an Account

Forgot your password?
LiveZilla Live Help

Cart  

(empty)

Join us

Join Digiway @

Facebook   Twitter   MySpace

Newsletter